Bucket, Ice Dispenser

Mike for Model Number GSS25JSRESS

Answer Hello Mike, This can be a couple of different things. The first thing I would check is the defrost drain under the rear cover of the back wall in the freezer compartment. If it is frozen, use a hair dryer to thaw it out. Then chase it with a piece of weedeater line. It is flexible and stiff enough to fish the drain hose out without putting any holes in it. If this isn't the issue, check the ice maker for an overfill situation. In this case, the water line or ice maker can cause the issue, with the water valve being the more common cause of the issue. 

Tim M. for Model Number gs22jemdww

Answer Tim, the ice dispenser bucket WR30X10016 is 15 3/4" X 12 1/4". According to your model the replacement bucket only is part number WR30X10017. The bucket w/ auger is part number WR17X11429. Thanks! 

Jeff for Model Number GE ps123mgpb

Answer Hello Jeff. Based on that information you provided, the water valve is bad and will need to be replaced on the unit. 

Foboos for Model Number GSS25KGMC WW

Answer Hello Foboos! The manufacturer does not offer a single/flat ice tray for your unit. Here is a listing of ice buckets on our web site you can view to verify if one may fit your product. Each part pictured has a back drop with squares measuring 1". Hope this helps you, thanks. http://www.appliancepartspros.com/Appliance-Parts/?keyword=ice+bucket 

Tamera M. for Model Number HSS251FMD WW

Answer Hi Tamera. Ice Crusher The ice crusher uses a deflector. When the deflector is UP (“Crushed Ice” is selected on the dispenser control panel), the ice crusher operates. When the deflector panel is DOWN (“Cubed Ice” is selected on the dispenser control panel), the deflector is normally up. 1. Remove the ice dispenser tray and assembly (see page 21). 2. Remove 2 Phillips screws from the ice dispenser cover bottom. 3. Turn over the ice bucket and ice dispenser cover. Remove the Phillips screw. 4. Remove the cover. 5. Remove the Phillips screw for the ice cube control linkage and slide the linkage to the rear of the ice bucket.6. Using a pair of pliers, break the tabs off the back cover. 7. Using 2 flat blade screwdrivers, disengage the locking tabs at either side of the ice crusher (front top) and remove the assembly.8. Slide the back cover off the auger. The back cover must be replaced because of tabs broken off for disassembly. 9. With a flat-head screwdriver, remove the C-clip from the end of the auger. 10. Remove the auger and ice crusher blade assembly. Thank You. 

Claire T.

Answer Hello Claire. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx