I can't figure out how to get cabinet base unattached from rest of the dryer.
Answer Hi Joe. Remove the control panel.Remove the back splash cover. Remove the 2- screws that are in the back or the top assy. to the cabinet.Remove the top assy. by pulling the top forward. Open the door and remove the 4-phillips screws from the front panel. Remove the 2 phillips screws that hold the front panel to the inner top cover. Lift and tilt the front panel forward slightly to disconnect wiring to the door switch. remove front panel. Remove the belt tension. Remove the front drum rails/ supports. Using the belt as a handle, lift and remove drum. Then carefully unbolt all devices attached to the base, making sure that reassembly of all parts are known of correct placement. remember to re level the unit when all together. The base is part # WE20M398. Thank you.