Compressor wont kick on and both evap & condensor fans are running.
Answer Hello Keith. If there is power to the compressor, then it is either the starter or the compressor. If there is no power there, it is a bad main control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
How to clean the condenser air intake?
Answer Hello Harold. You will disconnect the power to the refrigerator. Then remove the back panel off the back of the unit. You can use a condenser coil cleaning brush TJ103 and clean the dust out of the condenser coils. Once the unit is clean, you will replace the back cover and reconnect the power to the unit. Hope this helps.