Condenser Fan Motor

John for Model Number G E Model#tbx21jabbrww

Answer Hello John. You need to check and see if the defrost timer WR9X520 is stuck on the unit. If so, it will cause the issue you sre having with the unit. If stuck, it will cause the compressor and fans not to run in the unit. If it is not stuck, you will need to check the temp control. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Lorenzo T for Model Number TBX16SIBLWW

Answer Hello Lorenzo T. Make sure the condenser coils are clean and look for a full frost pattern on the evaporator coils. If only a small section of the evaporators coils have frost on them, you will need a sealed system repair done on the unit. 

Patrick J. for Model Number tpx24spbabs GE Side by Side

Answer Hello Patrick. No, based on the information you provided, the condenser fan motor WR60X187 is bad and will need to be replaced. 

J Houde for Model Number 1999 GE TPS24BPCBS condenser fan motor WR60X10010

Answer Hello J Houde. Yes, it is normal for a little back and forth play in the condenser fan motor WR60X187 shaft. As long as the fan motor is running properly, you should be fine. Hope this helps. 

Errol G. for Model Number CSX20BAXAWH

Answer Hello Errol. Yes, if the compressor is on, the condenser fan motor WR60X187 should be running. Hope this helps.