How do you install?
Answer Hello Wynn. You will need to disconnect the power to the unit. Then remove the outer cover and the grill from the unit. Once removed, you will need to remove the control panel and unplug the wires going to the board. Remove the board from the old panel and install it into the new one. Make sure you get the ribbon cable seated properly. Reinstall in reverse order with the new control panel WB07X11033. Hope this helps.
How do I replace GE Control Panel Asm BK, part # AP3993527?
Answer Hi Mikey.Remove all power. Remove the top grill screws. Gently pop out the grill or in some cases you will need to pull and slide to the rt. to remove. Then on top of the control panel area is a square metal plate to remove above the control board. Then this will give access to a single Phillips screw that hold the top of the control panel. Remove the screw and lift and pull out the panel. Disconnect the board electrically 1 at a time and remember to reconnect the green ground wire. Do not touch the board while replacing (Static Discharge). Reassemble in reverse. Thank you.