My touchpad has failed. What is the correct replacement part for a touch panel and can I replace this myself?
Answer Hello Julie. You will need to order part number WB56X10824 for the control panel. These are not to hard to replace, but make sure the power is disconnected before replacing the part. You will remove the grill on the top to access the screw to remove the control panel. Then lift out the panel and unplug the wires. Next remove the board and install new part in reverse order.
Need control panel. What is part Number or this?
Answer Hello Fontella. Based on the model number WB56X10824 is the correct control panel.
Microwave oven. I push on light on or nite light, both are not working but other fans working. Should I replace panel control?
Answer Hi Richard. I would use a volt/ohm meter part # TJMA-DM1 to assist. you in your diagnosis. Make sure that you are getting 120 vac from the control board to the light socket. If not, then find out if there is a bad socket or wiring from the control to the socket part # WB08X10022. The bulb part # WB36X10328 is housed inside the lower light diffuser. Remove the cover with one screw then replace the bulb first before replacing the control board part # WB27X10931. Thank You.