started the oven the other day while cooking dinner while waiting for it to pre heat the oven filled with gas and shot flames out of the door now it doesnt work at all broiler at top works and stove top but not the oven also the oven has never heated up tp proper temp any ideas??
Answer Brad, you most likely had a weak or faulty oven igniter WB13K21 causing a delayed ignition, this could cause the circumstances you described. The igniter produces an amp draw of 3.2 to 3.6 amps, this in turn opens the switch inside the gas valve WB19K36 if the amp draw was low and long enough, it could cause the valve to open but not ignite, until there was enough gas built up in the area to "explode". This could also be the cause of your oven temperature issue.
My oven sometimes doesn't reach the temp. Needed, why?
Answer Hello Thelma. You will need to check the oven sensor and see if it is bad in the unit. It should read around 1100 ohms at room temp and 1650 ohms at 350°. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Got a F2 code, Reset oven, No further code. Temp feels correct. What's the glitch? Do not have thermometer to verify actual oven temp.
Answer Hello Pete. If you reset the unit, and it has stopped the code, then it might be ok. However, if the code comes back, you will need to replace the control WB27K10141. Hope this helps.