Conversion Kit

Mary for Model Number Hotpoint rgb 745 WEH5WN

Answer Mary, you'll need to lift the cooktop up to gain access to the orifices. The orifices are in the middle of the brackets on the orifice holders. The conversion kit will come with further installation instructions. Thanks. 

Dawn for Model Number Kenmore Gas Range model 790.7250*

Answer Hello Dawn. RF is Blue/Magenta. LF and LR are Blue/Brown. RR is Blue/blue. 

F.s. for Model Number RGB745BEH6 WH

Answer Hello! The conversion kit WB28K10556 comes with all parts needed to convert your appliance over to LP. You will only need one kit. Thanks! 

Joyce W. for Model Number RGB746WEH1WW

Answer Hi Joyce. Remove power and shut the gas supply off behind the unit. There are 3 -different colored coded top burner orifices. One nat' gas is part # 67005560 blue color. Another is part # WB28K10030 red color this is for the front rt and the lt.. Another is part # WB28K10029 1 07mm is for the small burner at the rt rear. and the last one is part # WB28K10022 medium size this orifice is for lt. front and r.r top burners. Then you loosen the bake and broil burner orifice hoods up 2-to-2-1/2 full turns. On the side of the safety valve is a lever to shut the gas off to the safety valve only. You also remove the gas regulator cap and invert the pin under the top so it says "nat" instead of "lp". Remember to adjust the air shutters on the lower bake and broil burner assy. Thank You. 

Jo W. for Model Number RGB533DEP1BB

Answer Hello Jo. The conversion kit WB28K10556 converts all for burners on the top of the unit. You will need to flip the regulator and adjust the oven burners. Hope this helps.