Cover, Sump

Steve for Model Number GSD2200G02BB

Answer Hello Steve. Part number WD12X417 is just the sump cover. I believe the part that you are describing is called the sump. It is part number WD18X213. Hope this helps. 

1 person found this answer helpful.

Penelope for Model Number Model# 363-15465790 Kenmore (GE)

Answer Hello Penelope. You will remove the sump cover WD12X417 from the inside of the unit. 

Kathy A for Model Number HDA900VBA Dishwasher

Answer Hi Kathy. The screws you need are part # WD2X295. You will need 2 of them. The cap just inserts into the tub body and the cover holds it on. Thank You. 

Nick for Model Number GSD4000R00BB

Answer Hello Nick. Hold the spray arm from turning and turn the tower nut clockwise because it has left hand threads. Remove the nut tower then lift out power tower assembly. Unscrew and remove ¼" hex screw from center of the wash arm. Remove spray arm. Unscrew spray arm hub. The sump cover WD12X417 is held down by 2 long screws. The sump cap pulls up and out of the tub after the cover is removed. Next disconnect rear calrod support and remove the filter screen assembly. Unscrew plunger from collection chamber. Remove hoses to collection chamber. Unscrew 4 5/16 screws that hold the collection chamber WD22X10024 to the tub. Hope this helps. 

Al T. for Model Number GSD4000N20CC

Answer Hello Al! Yes, the spray arm, filter, and pump cover will all need to be removed to access the sump. Thanks.