I found part #367 had come dislodged. I cannot find a diagram showing exactly how it is attached to the icemaker. Can you help me?
Karen K. for Model Number PSS26NSTC Refrigerator
Answer Hi. This is the ice maker fill cup or fill spout, part # WR29X10058. It attaches to the ice maker mold and the fill tube coming through the wall in back will be inserted into the "u" shaped cut out on on the other end. "The ice maker is located in the upper rear of the freezer compartment and supplies ice to the dispenser tub. 1. Disconnect the ice maker cable connector. 2. Remove 1/4-in. ice maker mounting screws(2 screws) and slide out the ice maker." Thank You.
Is this part supposed to be filled with frozen water or empty when everything is opperating properly and the ice bucket is full?
Eric for Model Number GSHF5KGXCCBB
Answer Hello Eric. The fill cup WR29X10058 should alway be empty unless, the unit fills the icemaker. The it will have water run through it into the icemaker. If it is frozen over, you will need to replace the water valve WR57X10032 on the unit. Hope this helps.
where does part ap3191322 fit
Regina for Model Number hss25gftaww
Answer Regina, This is the icemaker fill cup or fill spout. It attaches to the icemaker mold and the fill tube coming through the wall in back will be inserted into the "u" shaped cut out on onthe other end. "The icemaker is located in the upper rear of the freezer compartment and supplies ice to the dispenser tub. 1. Disconnect the icemaker cable connector. 2. Remove 1/4-in. icemaker mounting screws(2 screws) and slide out the icemaker." Thanks and Good Luck