MY PANEL IS FLASHING 31 AND F7 NONE OF THE BUTTONS WORK ON THE PANEL?
The error code F7 indicates a shorted key matrix which would be a faulty membrane switch. You will want to power down then power up the range. If the error condition reappears within 15 minutes then replace the Control WB27K10355.
I have been having problems with my oven shutting off and the code "F0" flashing. What would the correct part be that I would need to replace it with. Thanks
Answer Hello Hal,
You will need to replace the control panel. The F0 code indicates the OFF key is shorted. Determine if problem is with Key Panel or Control by disconnecting the ribbon cable and measuring flat cable pins 2U3 and 5-14. Should be open. Should be 100–150 ohms while pressing OFF key. (For membrane models only.) Perform glass touch board key panel test, making sure to test EVERY pin combination for possible shorts. If there are no shorts, the problem is probably with the control. (For glass touch models only.) I would have listed the part numbers but could not without the complete model number.