I need to replace the element Part Number AP3188020. How detailed a repair is this?
Answer Hello Joseph. You will need to disconnect the power and uninstall the cooktop. Remove the screws holding the top to the frame. Lift off the top of the unit to access the element. Reinstall in reverse order. Hope this helps.
1 person found this answer helpful.
The left rear burner displays a fault code F126 and the left front burner displays a fault code F113. What do they tell me?
Answer Hello Charlie. The f126 is telling you the left rear element Heater not heating and the F113 is for Open temperature
sensor (RTD). (1) Check all heater, sensor, and wire harness connectors. Make sure they are tight and secure
Check heater ribbon for possible damage.
(2) Remove sensor connector from the board and measure RTD resistance. Should read from
1030-1150 Ohms (46¥F-102¥F.) If it does not, replace the heater and recalibrate inductive
(3) If fault persists, replace main board and recalibrate inductive sensors.