Filter Coarse

Chris for Model Number GE GLW6200L00WW

Answer Chris, the filter/cover assembly WD22X10077 is a "snap/lock fitting", remove the cover, press the two tabs in(towards the center) and lift the filter out. You'll also need to remove, the lower wash arm, fine filter, and upper wash arm tube , then you can unsnap and lift the course filter off the sump/pump housing and clean or replace it. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Rod for Model Number PDW9200N20WW

Answer Rod, the coarse filter WD22X10029 is a thin metal. Thanks! 

Note: This question is for the older version of this part, but we thought you might still find it helpful

HOOK1948 for Model Number PDW9280l00ss

Answer Hello Hook. To remove the filter WD22X10029, The lower spray wash arm can be removed by gently lifting and rotating it coun ter clock wise. The nut hub can be removed by rotating it counterclockwise. Then remove the main conduct and lift out the filter. Hope this helps. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Sam M. for Model Number pdw7800j01bb

Answer Hello Sam. Here are the instructions from the manufacture for the model number you provided. Hope this helps. To Remove Lower Arm and Fine Filter Assembly 1. Remove lower rack from dishwasher. 2. Gently lift and rotate lower spray arm counterclockwise to remove. 3. Rotate nut hub counterclockwise to remove. Gently lift fine filter assembly up. Remove fine filter drain from sump. 4. Clean fine filter screen if soil is present. 5. To reinstall fine filter and lower spray arm reverse procedure. NOTE: When installing fine filter make sure the drain port of the filter is engaged with the drain for the fine filter. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Johan S. for Model Number GE Triton XL Model GSD6200 J01WW

Answer Hello Johan. Remove the lower spray arm. Then the nut hub WD12X10061 will twist to release from the tabs. Then you will need to release the tab on the top of the conduit WD12X10057, and release it from the filter. Then the filter WD12X10050 will lift out of the assembly. Hope this helps. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Robin

Answer Robin, the part pictured is what you will receive. If you will please provide your model number we will be glad to verify the correct filter coarse for you. Thanks!