Hi, my oven is model number JBP64W0B5WW. However, every time I look this model up on google, or your website, it is always shown without the '0'. JBP64WB5WW. I have rechecked this multiple times, and I'm 100% positive the '0' is there. So, I'm hoping you can confirm that the AP2032613 Frame Window Pack will fit my model #JBP64W0B5WW oven door. Also, do you have some information you can email me about how to perform this window pack replacement myself? It seems like it should be easy, but I get nervous when I look at all of the parts available. I just need to replace the broken inner glass (window pack). Thanks very much!
Answer Hello Erika. Yes, WB55T10065 is the correct window pack. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.