Gasket Door

Deanna for Model Number RH758V K2

Answer Hi. Remove the door and place it on a protected table top. Place it open side up. You have to un-layer it starting from the sides and the handle nuts and screws. Lay them all aside so you know how to reassemble them. The same holds true to all the inside parts one at a time. When replacing the door gasket part # WB2X6547, make sure it is layed flat and not twisted so it forms and seals properly. The ends of the door seal lay inside the door. Lay all glass one at a time so they are placed inside the door exactly as removed. Make sure the window seal is not kinked so it seals against the glass. Thank You. 

Pete P. for Model Number RS743G*J1

Answer Hello Pete, These are called a torx head screw. I'm not sure about the exact size but you can go the the nearest hardware store and buy a torx bit set that includes 5 or 10 sizes. The size you need will be between a T-20 to a T-30 approximately. 

Lynn for Model Number JHP97GY2

Answer Hi Lynn. Yes this gasket is designed to withstand all oven temperatures. Door gasket part # WB2X6547. Cover a table w/ shipping blanket. open the door and lock the hinges for removal of door. Then remove it and put it face down on the table with the handle just off the table's edge. Then you can access the inner door screws surrounding the frame. You only need to remove the inner door so you can lay both gasket edge's into the inner door hole so it is not folded wrong and forever twist the gasket. It all needs to lay natural. Thank You. 

Marty D.

Answer Marty, to verify the correct oven door seal used on your appliance we will need your model number. Please obtain this information for further assistance. Thanks! 

David for Model Number RB7340A5AD

Answer Hello David. Yes, based on the model number you provided, WB2X6547 is the correct door gasket. Hope this helps. 

Bob M. for Model Number Caloric ESP396-21, Serial #3075269

Answer Hello Bob! The original gasket 0071637 has been discontinued. The manufacture has not suggested a replacement or a cross reference to your gasket. Unfortunately, we will be unable to suggest WB2X6547 as a replacement. Sorry.