What are the dimensions of the gasket for the fresh food door for part number 104?
Answer Hi Jerry. The manufacture does not give us the exact dimensions for the gasket part # WR24X437. It is the direct original replacement. Thank You.
Is the GE part number WR24X437 (a.k.a. your AP2067911) a) easy to change, and b) is it an exact part replacement? My frig runs too much - is the frig gasket magnet usually the cause. It does turn on and off.
Answer Don, Have you checked the door seal for a seal to the front flange ? Use a thick piece of paper or dollar bill, open the door, lay the paper against the front flange, and pull the paper out, there should be some slight resistance, check both doors. Also check and clean the front kick plate grille, and the condenser coil and compressor compartment (remove the lower panel on the back of the machine). If you should find a problem with one of the door gaskets, it's a pretty simple repair " 1. Pull the old gasket out of the channel. 2. Soak the new gasket in warm water to make it more pliable. 3. Using the back of a teaspoon, push the barbed edge of the gasket into the retaining channel." Thanks and Good Luck.