Installation Instructions ?
Answer John, Being that this is the freezer door gasket, you will need to remove the drawer front panel from the drawer rail system (2 screws per side) and lay the door down on a padded flat surface. grasp the seal in the center and pull up and out on the seal to remove it " The door gaskets are fitted tightly into the door channel. They should not be removed unless they need to be replaced. Note: When replacing a gasket, a wide blade screw driver may be necessary to remove the gasket." Before you attempt to install the new gasket, soak the gasket in a tub of hot water, to make it flexible and easier to work with. Have a metal tablespoon handy to smooth out any wrinkles or twists in the gasket and to help seat the gasket into the channel on the liner. Reverse the door removel procedure and re check for a proper seal to the flange.