For GE model # jtp15wd1ww
Previous question T20120304002JS060Z975573
Please advise how the exterior glass is attached to the door? There are no screws, trim etc. If there is no glue, theres got to be something to affix the glass to the frame.
Do I need the tape WB01T10052 to attach the glass to the door ? If so, why I need to detach/remove the door from the oven? Why can't I simply put the tape on the door frame and slap the glass to it?
Thanks in advance
Answer Hello Faraz. The glass is held in with the top trim WB07T10241 and the door frame WB55T10078 and the door needs to be removed and disassembled to install the glass WB57T10160. Hope this helps.
I am looking at purchasing the exterior glass (part # AP3191791). How is it attached to the door frame (glued / screwed ?). Also, if glued, does the glass come with the glue or do I need to order the glue seperately ? What woudl be the part # for the glue? Thanks in advance for your help.
Answer Hello Faraz. Their is no glue used, To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass WB57T10160, you will reinstall the oven door back onto the range in reverse order of the way you removed it. Hope this helps.