How do I get the ceramic cook top off to replace the element?
Answer Hello JC. DISCONNECT POWER, Pull Range 0ut
from wall and remove top back wire cover.
2. Remove 2 hinge arm brackets and
disconnect ground wire from cooktop. 3. Remove 2 screws from front edge of
4. Raise cooktop to 90” angle by carefully
rotating cooktop out from under control
NOTE; Place a protective coveting between
cooktop back and range body.
5. Remove hot light bracket and the two
element support brackets and carefully lay them
on top of oven liner and lift cooktop.
6. Reassemble in reverse order.
NOTE: Care must be taken not to scratch
underneath side of glass