This handle is attached to the fridge at the top of the handle by 2 accessible screws but the drawing is unclear as to how many screws and the top of the screw seems to be hidden by a small plastic cover which seems to be glued onto the handle.Do you destroy the plastic plate to access the screw top? Do you need to order and glue a new plate to the handle?I think the plate is for cosmetic purposes but it seems hard to remove.Any advice?
Answer Hi Golface. Fresh Food Door Handles.1- Remove the plug button by carefully prying underneath the edge with a small, flat blade. Remove the screw that fastens the bottom of the handle to the door. Remove the lower part of the long handle (some models). 2. Remove the 2 screws and the handle from the top of the door.3. After the handle has been removed, move the small plug buttons to the opposite side of the door and install in the screw holes. 4. Move the large plug button to the opposite side of the door and install in the thimble hole. 5. Move the front door plug button to the opposite side of the door and install in the screw hole. 6. Install the handle to the opposite side of the door with 3 screws. Note: If equipped with long handle, ensure that pin in the lower part of the handle is installed in bottom of the door.7. Install handle plug. Freezer Door Handles 1. Remove the screws and handle from the freezer door. 2. Move the plug button to the opposite side of the door and install in the handle screw hole. 3. Install the handle to the opposite side of the door using the holes closest to the edge of the door. Theese instructions are directly from the manufacture. The fresh food door bottom handle screw and cap is part # WR12X10567. Thank You.