Hi, I have a new auger but can not assemble it, is there an assembly manual, cd, or online help to show me how to assemble the auger in the ice box.
There are no repair manuals, videos or instructions for the replacement of the auger on the ice bin. To change out the auger you will pull the ice bin out and empty it. Turn the bin over and remove the screw holding the lever on the underside of the bin. There should be an e-clip on the center of the front that you would need to remove along with the washer under it. Remove the screws holding the housing onto the front of the ice bin. Once you have the housing off you will need to remove the 2 bottom screws holding the metal plate to the ice bin. Lift out the auger assembly. The part that will be the trickiest will be the removal and replacement of the blades. When You remove the nut which is left threaded, you will want to pull each blade and spacer and keep them in order. You may want to mark them so that you remember the order they go back in. Once the blades are removed then you will remove the drum and start reassembly.