how to change part # ap2632907
Answer Randy, Here is some basic information : 1. Disconnect power to range 2. Remove 2 end caps mounted by 2 screws each(one on the top and one on the side) pull bottom of end cap forward to release bottom tab and then to the side to clear top screw mounting tab. 3. Remove two screws across bottom of control panel. 4. Pull down and forward on bottom of of the control panel and rotate up to clear end plates. 5. Slide top of control panel backto disengage tabsfrom backof range and lift off. 6. Lay control panel aside on protected surface to prevent damage. Thanks and Good Luck
My oven control key board read 888888 across the board. Stove top still works. Is thr kit ercllib what I need?
Answer Hello Martin. Yes, based on the information you provided, it sounds like the ERC WB27T10242 is bad and will need to be replaced. Hope this helps.
Do I just unplug old one and plug in new one. Any rewiring to be done?
Answer Hello. You shouldn't have to do any rewiring with the new part. All you need to do is unplug the connectors on the old part and plug them into the new one. Hope this helps.