my lower arm just fell off do i need replacement parts or does that snap back on?
Answer Dina, The lower spray arm WD22X10035 The lower spray wash arm can be removed by gently lifting and rotating it coun ter clock wise.
The nut hub can be removed by rotating it counterclockwise. The middle spray arm WD35X10055 is a bit more difficult Pull upper rack all the way out. Remove plastic screw on bottom of middle spray arm. This will allow the middle spray arm and bearing to be removed. Note: Install middle spray arm with spray jets facing the upper rack. Place bearing between spray arm screw and bottom of the middle arm.
Mid spray arm not spinning during wash cycle. Top shelf not cleaning. What might cause this problem?
Answer Hello Joe. Make sure the filters in the unit are clean. If so, make sure the water level inside the dishwasher is high and about 1½" deep. If not, replace the water valve. Hope this helps.
I asked how to remove the lower spray arm. Your answer was to lift it up. I tried, it feels like it will break. Is it snapped in??
Answer Hello Laurier. Some of these spray arms need to be lifted up and turned counterclockwise to remove them. It depends on the model of dishwasher. According to the model number you provided, you will need to lift and turn the lower spray arm. Hope this helps.