I changed both elements in the oven and no heat. The burners work oven light works clock works.
What could be the problem? The wires connecting to the elements were just like new with no defects.
You will want to check the oven control to make sure that you are getting proper power. You will want to access the control board and turn oven to the bake position. You will need to check across the BA to L1 with a VOM for 240vac. If there is 240 vac then you will need to replaced the oven control. If not then check from L1 to N for 120 vac and check from BA to N for 120 vac. If one side does not have the 120 vac then you will need to trace the lines back to find the break. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html