My washer fills with water but won't wash or spin I can turn the control knob and let the water out it hums like the capacitor or that hood switch is gone bad i just ordered both any other suggestions.
With the unit does not spin or agitate then you will want to check the lid switch on the unit. If the lid switch is faulty it will cause the unit to not spin or agitate and will not send power to the motor. Because the pump is on a separate circuit it will still drain without spinning.
Washer agitate but not spinning.
Answer Hello Rodney. On this model, you need to check and see if the unit is draining properly. If so, blow through the pressure hose and see if the air dome is clogged on the side of the tub. If so, blow it out. If it is good, and the hose is good, you may have a bad pressure switch on the unit.
Hello, ge top load washer wont spin. The machine goes thru wash cycle, drains most of the water, but wont spin the clothes. I pulled hose off pump, some water was in hose and a small amount in washer (couple cups of water) no obstructions, the pump hums. Belt is on motor, but no action. I was wondering what to check next, I asasume pump is working as it drained most all water from tub, was thinking water level switch bad? Please advise, thank you!
Answer Hello Jduluth. You need to check the pump. If it is humming, but not draining the water, there is either a clog or the pump is bad on the unit.