GE WB15X10022 Microwave Door Handle - AppliancePartsPros.com

Total
$0.00

Part Number:	AP2021173
MFG Part Number:	WB15X10022
Made by:	GE

Our Price
$31.53
Regularly	You Save
~~$48.43~~	$16.90

Most Interesting

Replacing Handle. 2 screws at top and 2 at bottom. Area accessed from inside of door after removing panel. However 2 are hidden. How do I get to those>

Mike for Model Number jvm1630bb004

Answer Mike, You may have to carefully, remove the latch assembly WB10X10012, and springs to access the screws you mentioned.

Was this helpful?

It looks like the only way to replace the handle is to take the door apart. Am I correct? How complicated is the replacement? Thanks.

Andy for Model Number JVM1650BH01

Answer Hello Andy, here is the correct door handle WB15X10144 for your model and it is not a complicated repair to do. There's a video in this link that shows how most of these doors come apart. Hope this helps! http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle-2.html

Was this helpful?

Regarding the forum instructions for handle WB15X10022 replacement. There are indeed two screws holding the handle visible after removing the inner door trim. Unfortunately there still two remaining screws that the heads are not visible for access that hold the handle on. The video on the forum shows how to access only two screws. Further information on how to access the "hidden" two screws would be immensely helpful. The previous thread addressing this tells me that the consumer had to pry the outer door cover apart and still had difficulty accessing these two screws. Hopefully there is an easy solution to access for this problem.

George for Model Number JVM1430BD03

Answer Hello George. On some models, you need to remove the inner frame from the door. The frame unsnaps from the door using a flat blade. Then you can access the screws for the handle WB15X10022.

Was this helpful?

Latest Questions

I don't have a question, I have a statement based on reading the other questions which state that only two screws retain the handle. If you have the same model as me, there are four screws. The handle comes in two halves; an inner and outer shell that snap together but each half requires two screws to hold it to the door. Two are immediately visible when you have pryed off the snap trim on the inner face. Two are extremely difficult to see and access. I had to partially pry the outer trim away and hold my screwdriver at an agle. When I replaced the handle I used chewing gum to gold the screw to the driver. Thanks.

Steve for Model Number GE JVM1660BB005

Answer Hello Steve. Thanks for the great information! Will help out others with this model.

Was this helpful?

How do you change?

Robert D. for Model Number jvm1660sb005

Answer Hello Robert. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html

Was this helpful?

I am looking for a door handle. I see 3 different part numbers for my model. What door handle do I need?

Joey for Model Number JVM1650SB004

Answer Hello Joey! The door handle comes available in three different colors; bisque WB15X10045, black WB15X10022, and WB15X10023. You will need to order the handle that corresponds to the color of your product. Thanks!

Was this helpful?

Microwave Door Handle

Questions & Answers

Description

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information