Motor, Evap.fan

Paul N for Model Number Kenmore 106.53632300

Answer Paul, Based on your post, and the wiring diagram for the model number you supplied, you most likely have a faulty evaporator fan motor 4389147. Whenever the temp. control closes and "calls" for the refrigerator to cool, it will supply power to the evaporator fan, compressor and condenser fan. All three components should run constantly and in unison, until the temperature is reached. If the compressor is running, then the fan(s) should be running as well. Thanks 

Nickie

Answer Hi Nikkie. Inside the fresh food by the controls is a Model / Serial tag. We will need this information to help get the correct fan part # you need. Thank You. 

Mitch for Model Number tfx24rll

Answer Mitch, If the water dispenser works, and the wires to the new fill valve are not damaged or broken, then the issue is in the fill switch or control mechanism in the icemaker. The manufacturer reccomends replacing the ice maker WR30X10093 with the updated version instead of attempting to adjust or repair the assembly. Thanks and Good Luck 

Dave for Model Number GE Profile TPH21PBSAW

Answer Hello Dave. Based on the information you provided, it sounds like the motor WR60X190 is bad and will need to be replaced. If it stops running, the freezer temperature is not cold enough for the icemaker to cycle properly. You will need to replace the evaporator fan motor. Hope this helps.