Replaced oven control T109, cooling fan will not turn on now. any ideas?
Answer Hello Mike,
You will want to make sure that you have the control board connected properly. Make sure that the fan wire is connected. You can test to make sure that there is output to the fan by checking from S1 or fan to the Neutral and make sure that you are getting 120vac. If you are getting 120 VAC then you would need to check to make sure that at the fan you are getting the same voltage. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html