Panel Door

Rod S. for Model Number JVM1630BJ02

Answer Hello Rod. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html 

Kim for Model Number jvm1631bj03

Answer Hello Kim, To replace the outer door panel you will have to remove the door from Microwave. Once removed then you will use a flat blade screw driver to pop the inner door out. Once out you will move all components to the new outer panel and reinstall. 

Ruleman for Model Number JVM 1631 BH 003

Answer Hello Ruleman! Unfortunately, the manufacturer does not offer the door panel in a brushed aluminum. Sorry about that! 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Shawn for Model Number JVM1631BJ01

Answer Hello Shawn. I have included a link to a diagram at the end of this message. This should help you disassemble your door. Popping off part 11 should allow you to access the screws holding the door together. Once these are removed, you should be able to easily take apart the door. I hope this info helps. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

James

Answer Hello James. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. It will help walk you through on how to get the door apart. Hope this helps. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html 

Note: This question is for the older version of this part, but we thought you might still find it helpful

James

Answer Hello James. The door will need to be disassembled to do a proper repair. The microwave is held up by mounting screws. Hope this helps.