Per your previous answer, I removed lower spray arm assembly. How do I remove old Service dome from the tub? Is it screwed in to the tub/body? Appreciate your help.
Shah for Model Number GSD5940F00SS
Answer Hello Shah. If necessary, the sump can be accessed without
removing the push on nuts by carefully lifting up
at the back edge of the filter assembly. Use care
when reaching around or through the coarse filter
as the sump opening in the filter can have a
sharp edge. Never lift the filter greater than 45°
without first removing the push-on nuts. If the posts break from the bottom of the tub, a
repair kit, WD22X10023 can be used. The kit
consists of a molded plastic base, which after
removing the lower spray arm will fit over the
raised center portion of the tub and hold down the
filter. Screwing the spray arm down over the
molded base holds it in place.
I bought the service dome coarse filter for my dishwasher. How do I install this part?
Amy W. for Model Number GSD5330DooWW
Answer Hi. The lower wash arm is a one peice spray arm. Insert a screwdriver into the the 2 lower vertical tabs to release the wash arm. The lower part has Rt. hand threads to unscrew the wash arm from the lower coupler. Service dome part # WD22X10023. Thank You.