Is the smart board the board I need to replace if it will not do anything. I checked the fuse and it is good
Answer Hello Justin. Check and make sure the filter board WB27X10519 is sending power to the smart board. If not, you will need to replace the filter board. If so, you will replace the smart board WB27X10931. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Some of the key pad functions are not working(Clear,AM/PM,Turn Table,Surface Light,Vent fan)?
Answer Hello James. Based on the information you provided, it sounds like the control panel WB07X11008 is bad and will need to be replaced. Make sure the ribbon cable is clean and is seated good on the smart board. If so, and some buttons does not work, replace the control panel. Hope this helps.