Washer viabrate when spinning in high speed and make a lot of noise. Please help me. It does this even if there is nothing in tub?
Answer Hi. Remove the front panel and look at the tub base. In the center there is a Approx 8-1/2" circumference snubber ring part # WH1X2312. It has a top and bottom teflon ring that has to ride centered in place and both surfaces need to be perfectly clean. If you see this damaged replace it. Make sure the springs removed are put back in the exact place. Make sure the snubber ring is placed correctly with the arrow pointed upwards. Thank You.
Trying to diagnose a problem with my washer. It was running, and it suddenly stopped agitating, and it smelled like hot rubber/smoke. The motor still runs, but it does not agitate. No money for a repair man, we must repair it ourselves. Please help, if you can?
Answer Hello Cindy. Check and see if something has the inner basket stuck. Chec kand make sure nothing is stuck between the inner and outer tubs. If the tub can be turned by hand, you will need to check and see if the belt WH07X10009 is good on the unit. If the belt is good, and there is nothing between the tubs, then you may need to replace the transmission WH38X10014 on the unit. Hope this helps.