GE WR2X9391 Socket & Terminal - AppliancePartsPros.com

Total
$0.00

Part Number:	AP2060923
MFG Part Number:	WR2X9391
Made by:	GE

Our Price
$3.74
Regularly	You Save
~~$7.02~~	$3.28

Most Interesting

I am a trouble shooter electrician with some knowledge of refrigeration trouble shooting. My tenant damaged my new hotpoint refrigerator and I need to fix it, I found the problem with temp control (rusted due to water damaged) also light socket missing and wires pulled. Do they sell whole complete part with temp control,light and the other stuff that comes with it. If they come I can just plug the wires to the connector and screw it up to the body.

Ben for Model Number HTR16ABSHRWW

Answer Ben, The control section does not come as a whole but you would have to order the parts individually.

Was this helpful?

The light in the refridgerator is shorting on an off. I need to replace the socket. After I unplug the fridge, what do I need to do to get at the existing socket and replace it for this model? Thanks

Paul S. for Model Number GE Profile Refrodge TBX25PRYDLAA

Answer Hi. Remove the control shaft knob.Remove one cover 1/4" side mount screw. Then cock the cover off the front of the controls to access the inner control bracket. The bulb is part # 60A. Then remove the inner control bracket that covers the light socket part # WR2X9391. The socket is held into place by screw mounts. Remove the screw and remove the socket. Thank You.

Was this helpful?

The light bulb switch seems to work fine but the light bulb in the socket is loose and flickering. What do I have to take apart to get the new light bulb socket hooked up? Thanks

Bob for Model Number GE TBX18ZLS

Answer Hi. Remove the top shelf. Turn the unit off. Remove the knobs. Remove the control cover. Inside is the bulb part # TJ8009 and the socket. The pars view does not clearly show how to access the socket but you may need to remove another inner cover to release the socket part # WR2X9391 from its push in tabs and replace it. It is an easy process. Thank You.

Was this helpful?

Latest Questions

Thank you for all the help so far. I'm pretty handy and just want to be sure of the order of steps I need to take to take to do this bulb socket switch. First I remove both fridge and freezer doors. Then I remove screws holding center mullion in place. This should allow me to remove mullion and bottom floor of freezer to access area for bulb socket replacement. Is there anything else I need to know or anything else you can suggest at this point?

Reece C. for Model Number TB14SCB

Answer Hello Reece. According to the manufacture that is correct. Under the freezer floor there is a piece of Styrofoam that will need to be removed to access the socket WR2X9391. Hope this helps.

Was this helpful?

Thanks for answering socket replacement question indicating that I need to remove center mullion and bottom freezer floor to replace socket. Do I have to remove only freezer door to perform above or or do I also have to remove lower fridge door? Do you suggest using a putty knife to pry out mullion?

Reece C. for Model Number TB14SCB

Answer Hello Reece. Yes, you will need to remove the refrigerator door as well. Also, remove the screws holding the mullion in place. Once the screws are removed, you can use a flat blade putty knife to remove the mullion. Hope this helps.

Was this helpful?

I am trying to replace the bulb socket on the above unit (which does not have an L or an R after the serial #)and have looked at the parts diagrams and Q and A section. I still am not sure what I have to disassemble to remove the bulb socket.

Reece C. for Model Number TB14SCB

Answer Hello Reece. You will need to remove the center mullion and the bottom floor of the freezer to access and replace the socket WR2X9391. Hope this helps.

Was this helpful?

Socket & Terminal

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information