How do you install the door hinge link arm and both springs?
Answer Hello JR,
To install the door hinge and spring assembly you will first need to pull unit out. With unit pulled out you will need to remove door panel. Panel is held in by #20 torque screws. Once you have the panel off you will need to take the hinges off which should be held in by 2 screws. The springs will have to be removed prior to this. Install new hinges and put door back together. Install springs.
How do you install GE Spring Door (Part Number: AP3419553) ? Thanks.
Answer Hi Al. Pull out the unit all the way. Insert the plastic Hinge Arm Link Item Number: WD14X10009 on each side of the door frame at the rounded end at the bottom of the door hinge. Then hook the longest spring hook part # WD03X10006 end into the link end not connected to the door hinge. Then insert the other shorter spring hook above the back leg adjustment where there are 4-holes that are on the outer sides of the frame . Hook it into the 3-rd hole from the front on each side. Thank You.