My dishwasher does not fill with water when started. When coil is taken out, hooked up to water and energized, water flows thru it. I don't know what part needs changing to correct this.
Answer Hello Robert. You will need to check and see if the float is stuck in the up position. The float needs to move freely up and down. If it is good, you will want to test and see if the float switch WD21X479 is working properly. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html