I need a diagram on how to install a new temperature switch. Thank you.
Answer Hello Bonnie,
Turn the power off to the unit and remove the three screws along the top of the control panel. This will enable you to flip the control panel off and access the switches. Pull the knob off and raise the locking tab and rotate the switch to remove. Now remove one wire and attach it to the new switch making sure the terminals are the same. Remove another wire and attach it to the new switch. Continue in this manner until all the wires have been transferred. Reassemble in the reverse order.
My Dryer has all funtions but wont produce Heat. The test for the Thermo switch checked out. Whats next?
Answer Hello John. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html