My washer fills and goes through the wash cycle but when its finished it wont drain or spin. The timer hums and ticks. Could this be that the timer has gone bad or is it the pump?
William for Model Number s3600doww
Answer William,
You will want to test the pump to make sure that it is getting 120vac when the unit is calling for draining. If it is getting 120 vac then you will need to make sure that there is nothing clogged in the pump that would cause the unit to not drain. If this checks ok then you would want to replace the pump. If the pump is not getting power then you would want to replace the timer.
The washer fill, runs and drains but it will not spin. You can hear the timer ticking but no matter which cycle you choose, it wil not spin. Is this the timer or a belt or what?
Shannon for Model Number WBSR3140D5WW
Answer Hello Shannon. If all is working, you need to check and make sure the pressure switch is good, and the pressure hose is clear with no holes and the air dome on the side of the tub is clean. All will prevent the unit from spinning.