Burner valve leaking gas and need to replaced...can you guide me on how to remove the entire stove top to gain access to the gas valve ? thanks
Answer Hello Troy. Burner and Top Removal
Note: The cooktop does not need to be removed
from the countertop. 1. Remove all igniters. 2. Remove 2 Torx (T15) screws from each
burner base and remove the burner bases. Caution: When replacing burner bases on
glasstop models, do not overtighten screws.
Caution: Graphite gaskets are very fragile. Care
must be given to avoid breaking.
3. Remove the flat graphite gaskets and set
4. Remove the knobs from the cooktop.
5. Lift off the cooktop and place it on a flat,
6. Remove the graphite gaskets (glass cooktop
models only) and set aside.
Note: When reassembling the glass cooktop
models, replace the top before replacing the
graphite gaskets to avoid damage to the gaskets. Caution: There is a foam gasket (seal) between
the cooktop and the burner box (nonglass models
only). This gasket must stay in place to ensure
proper air flow to the burners.