Thanks for your reply. However, the back handle screws are concealed by the door metal.
John for Model Number AP3424950
Answer Hello John. You will need to remove the door. Use a shipping blanket placed on the table place the door on with the front facing upwards. Remove all surrounding side and lower trim. Next remove all the screws and disassemble the door assembly. This will give access to any top vent side screws. Remove the handle back screws. Then remove the vent screws and replace the trim part # AP3424950. Reverse installation to finish the job.
How do I install trim. Removing 2 screws on each side does not appear to loosen trim from glass. Do I have to remove door from oven and take metal door trim apart all around. I noted handled is affixed with a screw on each side from the back of trim I guess. I can not find a good manual!
John for Model Number AP3424950 Trim Vnt Dr
Answer Hi John. You will need to remove the door. Use a shipping blanket placed on the table place the door on with the front facing upwards. Remove all surrounding side and lower trim. This will give access to any top vent side screws. Remove the handle back screws. Then remove the vent screws and replace the trim part # WB07T10241. Reverse installation to finish the job. Thank You.