Tub Corner Baffle

Brian for Model Number Gsd5560g03ss

Answer Hello Brian. The old baffle lifts out of the corner of the tub and the new baffle WD8X227 presses into place. 

Kiki for Model Number GE GSD940L

Answer Hi Kiki. Yes this is the part that my be missing from your dishwashers front inner lower lt. corner. Tub Corner Baffle -WD8X228. For right side use WD8X227. Thank You. 

Mario R. for Model Number GE Nautilus

Answer Hello Mario. You will need to test and see if there is power coming to the solenoid when the machine is in drain cycle. If so, but the solenoid does not engage, you will need to replace the solenoid WD21X10060. You can test this with a multi-meter TJMA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Jim K

Answer Hello Jim. You will need to inspect the corner baffles for wear. Also look at the door seal and make sure there are no suds inside the dishwasher from to much soap. Hope this helps. 

Peter V for Model Number GE- ZBD3500 dish washer

Answer Hello Peter. These clip onto the tub rail. Hope this helps.