Is this easy to install the gas on the stove?
Does the glass comes with instruction to install?
Celeste for Model Number LRE30755SW
Answer Hello Celeste. The cook-top 4890W1N005A comes with the frame and glass. Unplug the cord or disconnect power. Open oven door and
remove the 3 screws located
at the front of the cook-top,
then close the door. Lift up the cooktop front and
Remove the ground screw
securing ground wire. Slightly lift up and pull up the
cook-top and then unplug
the 2 connectors at the back
by squeezing side tabs. Protect the cooktop surface
and turn the assembly over. To remove the surface elements
a) Remove the wires from
the element and limiter
terminals.
b) Remove the element
bracket screw (shown
above) for the element
you are servicing.
d) Carefully lift the bottom of the bracket just far enough
to remove the element.
REASSEMBLY NOTE: When you reinstall the element
make sure that the wires are inserted into the correct
tap then reinstall the bracket screw to secure it to the
cooktop.