Stove / Oven / Range Control Panel - 3720W0C247A
is this the right part I need if I am getting an F1 error code?
Answer Hello Alicia,
The F1 Error code means that the oven sensor 6322B62214A is shorted or open. You will want to ohm the sensor and should have a reading of approximately 1090 ohms. If this checks ok then check continuity of the Wiring from the sensor to the PCB. If there is continuity then it is good. If the sensor does not ohm out at room temp then you would have to replace sensor. If these check ok then replace the clock/control board 6871W1N002A.