24/7 Customer Support

:

Chat with a Pro

Pcb Assembly,main

Part Number: AP4439536
MFG Part Number: 6871DD1006F
Made by: LG

Genuine LG part.

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to determine if this part will work with your appliance.

Where can I find my model number?

More Product Images

Repair Help

Cross Reference Information

Part Number 6871DD1006F (AP4439536) replaces 1359792, 6871DD1006A, 6871DD1006B, AH3529865, EA3529865, PS3529865.

Have a Repair Question?
AppliancePartsPros has your Answer!

Questions & Answers

Ask a Question

Most Interesting

My dishwasher recently quit drying the dishes. Especially plastics, but everything has to be towel dryed. Ranthe "upper only+Time delay+ power" check Program and had the following results. model ldf6810st/01 s/n 710kwks01461 All Top display codes were good through the Rinse button. Time delay 1 time produces defferent codes each time run. 55, 57, 54, 61 the last four times. time delay 4 runs for a minute or so then comes up with FE or 00/08 code. time delay 9 "Thermistor" returns a 44 code, or 28 code instead of 39. all other time delay tests show the correct results. I pulled the inlet valve out today and checked the filter and ohmed it out. All looks good. Still doesn't dry. Appreciate any help.

Tony S. for Model Number ldf6810st/01


Was this helpful?

Found fill valve clogged with rust from bad water. Cleaned out did not help. Ordered new valve installed, no help. Machine will not fill. Still get error signal. No fill signal from main control board. Wiring checks out from board to valve. Question? Will new board fix my problem, or is there other devices in the circuit? thank you for your attention to this matter cheers Chuck.

Charles F for Model Number lds5811st


Was this helpful?

Serial number 504KW00377, purchased new February 2006 My main control board is bad. Local service company ordered part from LG - received similar control board, but would not work because two multipin connectors have been revised from three pin to two pin. My control board is stamped with LG part # 6870ED9001A. Your part number AP443956 shows the LG part # 6870ED9001C if you look closely at the component side view. The part brought yesterday by the service company was also a revison C, however the two (red & white) multipin connectors, shown in the upper right corner near the two blue modules, had been changed from three pins each to two pins each. My machine needs the three pin version. Your rev C board shows the 3 pin connectors. Is this the right board? Why would there be two different versions of the rev C board? Charles

Charles J. for Model Number LG Model LDS5811WW, no run code on model/sn plate


Was this helpful?

Latest Questions

The normal button on the dish washer doent light up when pushed and the machine doesnt work either. All other functions seem to work on the panel and the machine works on other settings and the buttons light up.

Carl for Model Number lds5811ww


Was this helpful?