Washer doesnt turn on replaced noise filter no change. Dont see any lights on main board.
Answer Hello Andy. Test for power going to the control board. If there is power there and it does not work, replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
This washing mashin don't take water in fact teak water only in tub clean process but not in the other processes
I want to know which part is cousing the problem so I can replace it
Answer Hi Jahja. You will need to replace the main control board part # EBR32816703. Make sure the water valve inlet screens are clear. Use a bucket to flush out the hoses as you inspect the water valve inlet screens. Valve part # 134190200. Thank You.