Pwb(pcb) Assm.,main

Rando for Model Number DLE5977W

Answer Hello Rando, You will want to make sure that the connector is back in and locked in place. A common problem that occurs is the pin that goes into the connector has wings on them that allow them to lock into place and not come out. If it has slid back out a little because it is not locked in place it will cause the error. Double check and if it is locked in then it would be a harness issue. 

Molina for Model Number 009kwlr00360

Answer Hello Molina. CL is for child lock. Press and hold the dry level button for 3 seconds to toggle on an off. 

Will for Model Number dle5977w

Answer Hello Will. The thermistor 6323EL2001B could be bad on the unit and need to be replaced. You will need to test the thermistor on the unit. It should read around 10 ohms. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Pat B for Model Number DLG2302R

Answer Hello Pat. Based on the model number you provided, EBR36858802 is the correct main PCB. 

Philip Sniezek for Model Number LGE- DLE5977W

Answer Hello Philip. Yes, based on the information you provided, it sounds like one of the control boards 6871EC1121A is burnt and will need to be replaced. Hope this helps.