LG 6871ER1023R Pwb(pcb) Assm.,main - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4444711
MFG Part Number:	6871ER1023R
Made by:	LG

Our Price
$191.59
Regularly	You Save
~~$227.99~~	$36.40

Most Interesting

My washer has no power. Should I replace the main assembly or the circuit board and what's the difference?

Mark A for Model Number wm0532hw

Answer Hello Mark. If there is power to the main board, but nothing out of it, you will need to replace the main board assembly 6871ER1023R on the unit.

Was this helpful?

No power to washer at checked outlet. Where should I start ? Pub main ass or circuit board or is that the same??

Mark for Model Number wm0532hw

Answer Hello Mark. If there is power to the main board, but none coming out, you will need to order and replace the main board in the unit.

Was this helpful?

My LG washer is completely dead. There is power at the outlet. Service guy told me I needed a "control panel interface" can you tell me what part that is? Thank you.

Laura for Model Number wm2032HS

Answer Hello Laura! If you are needing the display interface that would be part number 6871EC2025D. Thanks!

Was this helpful?

Latest Questions

Note: This question is for the older version of this part, but we thought you might still find it helpful

When pushing the power button, nothing happens. No light illuminate. I tested power at both sides of the filter and it showed good. Tested power on male plug at PCB board from Filter and showed power. Red led light on PCB board is not illuminated. Tested female plug on PCB board that goes to PWB board. Should I replace the PCB ?

Cliff for Model Number LG WM2032HW

Answer Hi Cliff. It sounds like you need the main power control board part # 6871ER1023R. Thank you.

Was this helpful?

Note: This question is for the older version of this part, but we thought you might still find it helpful

My washer is not turn on at all? The plugs are fine and the water didnt drain.

Jhjkhjk

Answer Hello. Make sure there is power at the filter board 6201EC1006L and it is sending power to the PCB 6871ER1023R. If there is power at the PCB and it does not work, replace the PCB. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Note: This question is for the older version of this part, but we thought you might still find it helpful

Washer won't turn. Should I replace the PCB or the lid switch?

Dario for Model Number WM0532HW

Answer Hello Dario. Test the motor and make sure it is good. If so, and the door is locking, you will need to replace the PCB assembly 6871ER1023R. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Pwb(pcb) Assm.,main

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information