Washer will not drain replaced drain pump still won't drain.
You will want to check at the main control board to see if there is power going to the drain pump. If there is no power coming from the control board when the unit is in the drain mode then the control board is faulty and would need to be replaced.
Receiving multiple TE errors and PE, unplugged and waited errors still return.
Answer Hello Kltracey. The PE is for the pressure switch 6601ER1006E, and the TE is for the thermistor 6322FR2046C. You will need to make sure the pressure hose is clear and not cut. If it is good, you will need to replace the pressure switch. Check and make sure the thermistor is connected good. If so, you will need to replace the thermistor. Hope this helps.