Sump Assembly

Studioxyz for Model Number LDF7811ST

Answer Studioxyz, You will want to check for power getting to the drain pump. If power is not getting to the drain pump then you will want to check the control board for sending power. If the control is sending power then you would need to check the wiring and if not then replace control board. 

Jason for Model Number LDS5811WW

Answer Hello Jason. You need to order part number 3485ED1002B for the sump assembly. 

Brian for Model Number LDS5811

Answer Hi Brian. There is a vario motor part # 4681ED3001D that is placed beside the main motor part # 4681ED1004B. Remove the lower rack assy. and the lower spray arm. Remove the top sump filter assy. to clean the debris build up. It may be that the chopper blade down inside is blocked and not allowing proper water flow from the vario motor impeller itself. Thank You. 

Gary M for Model Number LDF6810ST

Answer Gary, First thing , check and make sure the drain hose is not kinked or clogged. disconnect the hose from the sink drain and blow in it or drain the dishwasher into a bucket. The Sump assembly 3485ED1002B is one way to go. Your post indicates the drain pump motor may be all you need 4681EA2002H You'll have a better idea of which way you want to go, after you review the information we're sending you. Thanks and Good Luck 

Bob for Model Number LDF 7810St

Answer Hello Bob! After some further research the replacement sump assembly according to your model/serial is part number 3485ED1002B. Thanks! 

Bill for Model Number lds5811st

Answer Hello Bill. Based on the model and serial number you provided, 3485ED1002B is the correct sump assembly. Hope this helps.