Albert G. • Finleyville, PA • December 13, 2014
Appliance: Jenn-Air Dryer-Ele JDE2000WC
My Repair & Advice
I raised the top of the dryer. Next removed two sheet metal screws holding the front. The drum was then pulled from the rollers in back and pulled forward to slip on the belt. Next the belt was placed around the drum, ribbed side down, then tensioner and motor pulley. I carefully slid drum back as I pulled the belt forward until the drum was back on rollers. Making sure the belt was still aligned correctly I spun the drum several times to be sure all was correct then re-assembled.