Water discharge broke. Had to replace the water tube assembly.
George S. • Delran, NJ • March 24, 2014
Appliance: KitchenAid KSRS25QAWH01
My Repair & Advice
The video on the website (ApplianceParts Pros.com) gave good instructions. However, the tube was taped to the inside of the control panel, therefore, pulling the tube through the door was impossible. I had to remove the entire control panel from the door, remove the tape, and the tube was free. After this, I had one other issue. With the tape and string on the tube, it was difficult to pull through the beginning of the bottom of the door. I ended up pulling a thin wire through the tube, then removing the tube from the door. I then placed tape on the end of the wire, and pulled that through. I then taped the string to the tube, and continued to tape the string, about 6 inches below the tube. I pulled it through the door, and once it became snugged at the bottom , I was able to pull on the taped wire, and force it through the hole. The taped string really helped strengthen the taped string, keeping it from slipping off the tube. Back in business.
People found this story helpful
Repair Time Estimate